Instruction Manual

0458-758-8621-B
65
English 25 Combinations of Guide Bars and Saw Chains
1)
Low kickback STIHL saw chain or guide bar (with green
label)
2)
STIHL saw chain or guide bar (with yellow label)
The guide bar and chain combinations listed above meet the
45° computed kickback angle requirement of § 5.11 of
ANSI/OPEI B175.1 when used on this model chain saw with
the matching chain sprocket listed above.
Use replacement guide bars or chains only as listed above
or as listed elsewhere by STIHL as conforming with the 45°
computed kickback angle requirement of § 5.11 of
ANSI/OPEI B175.1 when used on this model chain saw.
The guide bars listed below are green-labeled reduced
kickback STIHL guide bars:
–RollomaticES
– Drive link gauge/Groove width: 0,051 in. (1,3 mm)
– Length: 25 in. (63 cm)
The chains listed below are green-labeled low kickback
STIHL saw chains:
– 33 RS3 (Typ 3624)
– 36 RS3 (Typ 3626)
Since new bar/chain combinations may be developed after
publication of this manual, ask your authorized STIHL
servicing dealer for the latest STIHL recommendations.
3/8"
0.063 in.
(1.6 mm)
16 in. (40 cm)
Rollomatic E
2)
Rollomatic ES
2)
11 60
36 RS (Typ 3621)
2)
36 RS3 (Typ 3626)
1)
18 in. (45 cm)
Rollomatic E
2)
Rollomatic ES
2)
11 66
20 in. (50 cm)
Rollomatic E
2)
Rollomatic ES
2)
Rollomatic ES Light
2)
11 72
25 in. (63 cm)
Rollomatic E
2)
Rollomatic ES Light
2)
11 84
28 in. (71 cm)
Rollomatic ES
2)
Rollomatic ES Light
2)
11 91
32 in. (80 cm)
Rollomatic ES
2)
Rollomatic ES Light
2)
11 105
36 RS (Typ 3621)
2)
36 RS3 (Typ 3626)
1)
36 RSLF (Typ 3673)
2)
36 RSF (Typ 3678)
2)
36 in. (90 cm)
Rollomatic ES
2)
Rollomatic ES Light
2)
11 114
Pitch Drive link
gauge/Groove
width
Length Guide Bar Number of teeth
of sprocket nose
Drive link
count
Saw chain