Instruction Manual

0458-787-8621-A
8
English 5 IMPORTANT SAFETY INSTRUCTIONS
– To reduce the risk of injury to your face, STIHL
recommends that you also wear a face shield or face
screen over your goggles or protective glasses.
￭ To reduce the risk of head injury from falling branches or
other objects encountered during work:
– Wear an approved protective helmet.
￭ Prolonged exposure to power tool noise may result in
permanent hearing damage. To reduce the risk of hearing
damage:
￭ Good footing is very important. To help maintain a secure
footing and reduce the risk of injury while working:
￭ To improve your grip and help protect your hands:
5.4 Chain Saw
WARNING
￭ The saw chain has many sharp cutters. Contacting the
cutters may result in serious laceration injuries, even if the
chain is not moving. To reduce the risk of such injuries:
– Keep hands, feet and other parts of your body away
from the chain.
– Wear heavy-duty work gloves when handling the
chain saw or its chain.
– Never touch a moving chain with your hand or any
other part of your body.
– Cover the guide bar with a chain scabbard before
transporting or storing the chain saw to reduce the
risk of injury from inadvertent contact.
￭ Reactive forces, including kickback, can be dangerous.
– Pay special attention to the section of this instruction
manual on "Kickback and Other Reactive Forces,"
@ 6.
￭ To reduce the risk of personal injury to the operator and
bystanders:
– Always release the throttle trigger, engage the chain
brake and shut off the engine before assembling,
transporting, adjusting, inspecting, cleaning,
servicing, maintaining or storing the chain saw.
– Shut off the chain saw anytime it is not in use.
￭ To reduce the risk of fire and explosion:
– Only use the spark plug specified in this instruction
manual and make sure it and the ignition lead are
clean and in good condition.
– Always press the spark plug boot snugly onto the
spark plug terminal of the proper size.
– Never test the ignition system with the spark plug
boot removed from the spark plug or with a removed
spark plug.
– Always wear goggles or close-fitting
protective glasses with adequate top and
side protection that are impact-rated and
marked as complying with ANSI Z87 "+".
– Wear sound barriers (ear plugs or ear
muffs).
– Regular operators should have their
hearing checked periodically.
– Be particularly alert and cautious when
using hearing protection. Your ability to
hear shouts, alarms or other audible
warnings is restricted.
– Wear sturdy boots with non-slip soles.
Steel-toed safety boots are
recommended. Do not wear sandals, flip-
flops, open-toed or similar footwear.
– Always wear heavy-duty non-slip work
gloves made of leather or another wear-
resistant material when handling the
chain saw or its chain.