Instruction Manual
Table Of Contents
- STIHL MS 462 C-M
- 1 Introduction
- 2 Guide to Using this Manual
- 3 Overview
- 4 Safety Precautions
- 5 Preparing the Saw for Operation
- 6 Assembling the Saw
- 7 Engaging and Disengaging the Chain Brake
- 8 Mixing Fuel and Refueling the Chainsaw
- 9 Starting and Stopping the Engine
- 10 Checking the Saw
- 11 Operating the Saw
- 12 After Finishing Work
- 13 Transporting
- 14 Storing
- 15 Cleaning
- 16 Maintenance
- 17 Repairing
- 18 Troubleshooting
- 19 Specifications
- 20 Bar and Chain Combinations
- 21 Spare Parts and Accessories
- 22 Disposal
- 23 EC Declaration of Conformity
21 Spare Parts and Accesso‐
ries
21.1 Spare parts and accessories
These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
STIHL recommends the use of original STIHL
spare parts and accessories.
Despite ongoing market observation, STIHL is
unable to judge the reliability, safety and suitabil‐
ity of other manufacturers' spare parts and
accessories; accordingly, STIHL cannot warrant
for the use of those parts.
Original STIHL spare parts and original STIHL
accessories are available from STIHL dealers.
22 Disposal
22.1 Disposing of Chainsaw
Information on disposal is available from STIHL
servicing dealers.
► Dispose of the chainsaw, guide bar, saw
chain, fuel mix, gasoline, two-stroke engine oil,
accessories and packaging in accordance with
local regulations and environmental require‐
ments.
23 EC Declaration of Con‐
formity
23.1 STIHL MS 462 C-M Chainsaw
ANDREAS STIHL AG & Co. KG
Badstraße 115
D-71336 Waiblingen
Germany
declares under our sole responsibility that
–
Category: chainsaw
–
Manufacturer's brand: STIHL
–
Type: MS 462 C‑M, MS 462 C‑M VW
–
Serial number: 1142
–
Displacement: 72.2 cm³
conforms to the relevant provisions of Directives
2011/65/EU, 2006/42/EC, 2014/30/EU and
2000/14/EC and has been developed and manu‐
factured in compliance with the following stand‐
ards in the versions valid on the date of produc‐
tion: EN ISO 11681‑1, EN 55012 and
EN 61000‑6‑1.
The EC type examination pursuant to Directive
2006/42/EC Art. 12.3(b) was carried out by
DPLF, Deutsche Prüf- und Zertifizierungsstelle
für Land- und Forsttechnik GbR (NB 0363),
Spremberger Straße 1, 64823 Groß‑Umstadt,
Germany
–
Certification number K-EG -2016/7987
The measured and guaranteed sound power lev‐
els were determined according to Directive
2000/14/EC, Annex V, using the ISO 9207
standard.
–
Measured sound power level: 119 dB(A)
–
Guaranteed sound power level: 121 dB(A)
The technical documents are stored at
ANDREAS STIHL AG & Co. KG Produktzulas‐
sung.
The year of manufacture and serial number are
applied to the chainsaw.
Done at Waiblingen, 03.02.2020
ANDREAS STIHL AG & Co. KG
pp
Dr. Jürgen Hoffmann, Head of Product Data,
Regulations and Licensing
21 Spare Parts and Accessories English
0458-790-8321-B. VA0.M20. 29