Operation Manual

MS 461 R
English
26
N Lift up the bumper strips (1)
N Remove screws (2)
N Insert screws (3) M5x20 from the
conversion kit as shown in the
picture
N Put on the bumper strips (1) again
N Push the spacers (4), cover (5), and
spiked bumper (6) onto the screws
and secure them with the
locknuts (7)
Mounting the depth limiter
N Mount the guide bar and saw chain
– see "Mounting the bar and chain"
N Slide the guide (1) over the bar and
screw in the screws (2)
N Push the slide (3) into place
N Fit the star screw with washer (5)
N Tighten screws (2)
N Pull the slide (3) forward as far as
possible
N Tighten star screw (4)
3
2
4
5
3443BA030 KN
3
4
3443BA031 KN