Instruction Manual

MS 461 R
English
31
Fitting chain scabbard extension
N Push the chain scabbard
extension(1) and chain
scabbard(2) together, making sure
the locking tabs(3) engage in the
chain scabbard
N If more than one chain scabbard
extension is required, push the
second chain scabbard extension
and the first chain scabbard
extension together, making sure the
locking tabs(3) engage in the first
chain scabbard extension
Removing the chain sprocket cover
N Unscrew the nuts and take off the
chain sprocket cover.
N Turn the screw(1)
counterclockwise until the tensioner
slide(2) butts against the left end of
the housing slot.
Disengaging the chain brake.
N Pull the hand guarad towards the
front handle until there is an audible
click – the chain brake is
disengaged.
Fitting the chain
WARNING
Wear work gloves to protect your hands
from the sharp cutters.
N Fit the chain – start at the bar nose.
001BA249 KN
3
31 2
001BA250 KN
3
3
Mounting the Bar and Chain
143BA034 KN
1
2
001BA185 KN
001BA186 KN
143BA003 KN