Owner's Manual

MS 441 C-M
English
41
Installing the spark plug
N Screw home the spark plug, fit the
boot and press it down firmly.
N Fit the carburetor box cover.
Removing the Fan Housing
N Take out the screws (1).
N Push the hand guard upwards.
N Pull the underside of the fan
housing away from the crankcase
and remove it downwards.
Replacing a broken starter rope
N Use a screwdriver or suitable pliers
to remove the spring clip (2) from
the starter post.
N Carefully remove the rope rotor with
washer (3) and pawls (4).
Warning!
To reduce the risk of fire and burn injury,
use only spark plugs authorized by
STIHL. Always press spark plug boot (1)
snugly onto spark plug terminal (2) of
the proper size. (Note: If terminal has
detachable SAE adapter nut, it must be
attached.) A loose connection between
spark plug boot and ignition wire con-
nector in the boot may create arcing that
could ignite combustible fumes and
cause a fire.
1
2
000BA071 KN
219BA033 KN
Replacing the Starter Rope
and Rewind Spring
4
4
3
2
001BA096 KN