Owner's Manual

MS 441 C-M
English
34
Starting the chain saw
N Press the button, the
decompression valve will be
opened
The decompression valve is closed
automatically when the engine starts for
the first time. For this reason, press the
button again before each additional
starting procedure.
N Push the hand guard (1) forwards –
the saw chain is blocked
N Simultaneously press and hold
down the throttle trigger lockout (2)
and throttle trigger (3) – set master
control lever (4) to Start } and
simultaneously release throttle
trigger and throttle trigger lockout
N Hold and start the chain saw
Once the engine is running
N Simultaneously blip the throttle
trigger lockout and the throttle
trigger (2); the Master Control
lever (1) jumps to the operating
position F and the engine begins to
idle
N Pull the hand guard toward the
handlebar
The chain brake is released – the chain
saw is ready for use.
There must not be anyone within
the swivel range of the chain saw.
3
4
219BA039 KN
STOP
1
2
0
Open the throttle only when the
chain brake is off. Increased
engine speeds with the chain
brake on (saw chain is stationary)
will quickly damage the clutch and
chain brake.
2
219BA040 KN
1
STOP
0
001BA186 KN