Owner's Manual

MS 362
English
44
Installing the Spark Plug
N Screw home the spark plug, fit the
boot and press it down firmly.
N Fit the shroud.
Removing the shroud
N Move the Master Control lever to
stop position (0)
N Push the hand guard forward – the
chain is locked.
N Open the twist locks (1) by turning
them 1/4 turn counterclockwise with
the combination wrench.
N Remove the shroud (2).
Warning!
To reduce the risk of fire and burn injury,
use only spark plugs authorized by
STIHL. Always press spark plug boot (1)
snugly onto spark plug terminal (2) of
the proper size. (Note: If terminal has
detachable SAE adapter nut, it must be
attached.) A loose connection between
spark plug boot and ignition wire con-
nector in the boot may create arcing that
could ignite combustible fumes and
cause a fire.
1
2
000BA071 KN
4903BA008 KN
Replacing the Starter Rope
and Rewind Spring
1
1
1
001BA199 KN
2