Owner's Manual

MS 291 C-Q
English
44
Remove the fan housing
N Remove the shroud – see "Shroud"
N Remove screws (1)
N Push hand guard upward
N Pull the bottom of the fan housing
away from the crankcase and
remove downwards
Remove the rope rotor
For standard versions
N Carefully press the spring clip (1) off
of the axle with a screwdriver or
suitable pliers
N Carefully remove the rope rotor with
washer (2) and pawl (3)
For versions with Easy2Start
If appropriate circlip pliers are not
available, have the starter rope and/or
rewind spring replaced by a servicing
dealer.
N Carefully remove the circlip (1)using
the circlip pliers
N Remove the washer (2), carrier (3)
and spring housing (4)
N Carefully press the spring clip (1) off
of the axle with a screwdriver or
suitable pliers
N Carefully remove the rope rotor with
washer (2) and pawls (3)
Replacing a torn starter rope
For standard versions
N Remove remaining rope from the
rotor and starter grip
N Thread the new starter rope through
the starter grip and secure it by
making a knot
N Pull the knot into the starter grip
For versions with Easy2Start
N Remove remaining rope from the
rotor and starter grip
N Thread the new starter rope through
the starter grip and secure it by
making a knot
Replacing the Starter Rope
and Rewind Spring
1
1
1
1
5902BA028 KN
1
2
3
2710BA004 KN
The rewind spring can jump out –
risk of injury!
The rewind spring can jump out –
risk of injury!
1
5902BA017 KN
2
3
4
2
3
3
5902BA018 KN
1
213BA018 KN
151BA021 KN