Operation Manual

96 MS 241 C
: Push tank housing upward until
the peg (1) of the front
handle engages in the
mount (arrow)
: Raise tank housing (1)
: Orient bearing plugs (2) and
cover (3) so that the holes align
with the hole on the tank housing
: Screw in and tighten
screws (5) and (4)
2410RA304 TG
1
2310RA241 TG
4
1
3
2
5
: Position bearing stopper (1)
: Coat screw (2) with Loctite,
screw in and tighten, b 16
Versions with heating
: Position bearing plug (1) and
insert and tighten screw (2)
– Reassemble remaining parts in
reverse order
2410RA306 TG
1
2
2410RA307 TG
1
2
10.3 Antivibration element on
front handle
The antivibration element is
between front handle and cylinder.
– Remove shroud, b 6.4
– Remove the air filter, b 13.1
: Remove screw (1)
– Remove the front handle,
b 10.4
: Twist out bearing plug (1) and
unhook retainer (arrow)
: Twist out spring (2) and push
retainer (arrow) out of front
handle
– Inspect spring and bearing plug
and retain, replace if necessary
2410RA302 TG
1
2310RA243 TG
1
2