Operation Manual

83MS 241 C
8.5.4 Ignition – no ignition
spark
no
– Set Master Control lever
to position }
Troubleshooting
completed
– Check the flywheel,
(two pairs of poles?) b 7.6
Combination
OK?
– Check air gap between
control unit and flywheel,
b 7.3
Establish correct control unit/
flywheel combination
yes
Air gap
OK?
– Test ignition system
according to flow chart
"Ignition system
troubleshooting", b 7.8
– Set correct air gap, b 7.3
no
No ignition spark
yes
no
yes
Can engine
be started?