Operation Manual

72 MS 241 C
Versions with heating
: Push the holder (1) with the
ground wire (2) into the recess in
the air guide shroud (3) as far as
it will go
: Push ground wire (2) into the
guide (arrow)
: Push contact sleeve (1) into
heating switch
– Push in contact sleeve
completely
: Press lead (2) completely into the
guide (arrow)
2410RA223 TG
3
1
2
1
2410RA224 TG
2
: Push blade receptacle (1) onto
the connector tab
– Push on blade receptacle all
the way
: Press lead (2) completely into the
guide (arrow) of the filter base
Versions with manual fuel pump
: Push the holder (1) with the fuel
pump into the recess in the air
guide shroud (2) as far as it will
go
: Press fuel return line (3)
completely into the guide (arrow)
2410RA225 TG
2
1
3
2410RA226 TG
1
2
: Push the new fuel suction
hose (1) completely onto the
connectors (arrows)
– Reassemble remaining parts in
reverse order
8.2.4 Checking the solenoid
valve
– Carry out test preparations,
b 8.2.1
– Check screwed and plug
connections, b 8.2.3
– Check contacts and operation,
b 8.2.5
– Move the Master Control lever to
position "F"
– Connect the test lead, b 8.2.2
1
2410RA227 TG