Operation Manual

ManualsBrandsSTIHL ManualsChainsawsSTIHL MS 241 C-M

71MS 241 C

Screw (1) must be tight.

Leads (arrows) must be seated

completely and firmly in the blade

receptacles and the cable lug.

Plug connection (1) must be

pressed together completely –

locking lug (3) must engage the

recess.

: If necessary. remove the plug

connection (1) from the

mount (arrow), remove the

plug (2) and check the contacts,

b 8.2.3

2410RA217 TG

1

2410RA218 TG

12

3

Versions with heating

: Remove blade receptacle (1) and

contact sleeve (2)

: Push out the holder (3) with

ground wire (4) at the air guide

shroud (5) and lay it aside

Versions with manual fuel pump

: Push out the holder (1) with the

fuel pump at the air guide

shroud (2), remove fuel hose (3)

at the carburetor (arrow) and lay

it on top of the air guide shroud

2

2410RA219 TG

1

3

4

5

3

2410RA220 TG

1

2

All versions

Plug (1) must be seated completely

and firmly in the recess of the

solenoid.

: If necessary, remove plug (1) and

check contacts

: Set Master Control lever (1) to

position }; the cam on the

lever (2) must actuate the

microswitch (arrow) – clicking

sound

– If the microswitch is not actuated

by the lever at the carburetor,

replace lever if necessary,

b 13.6.6

– If the microswitch does not

function although it was actuated,

then the switchgear must be

replaced, b 8.4

2410RA221 TG

1

2410RA222 TG

1

2