Operation Manual

58 MS 241 C
: Remove screw (1) with washer
and remove ground wire cable
lug (2)
: Remove wiring harness (1) and
ground wire (2) from the
guides (arrows)
Versions with heating
: Pull out carburetor heating
lead (1) at the guide (arrow)
2410RA167 TG
1
2
2410RA168 TG
1
2
2410RA169 TG
1
: Remove blade receptacle (1) of
the carburetor heating lead
Versions with manual fuel pump
: Push out the holder (1) with the
fuel pump at the air guide
shroud (2), remove fuel hose (3)
at the carburetor (arrow) and lay
it on top of the air guide shroud
All versions
– Remove filter base, b 13.3
– Remove contact spring, b 7.7.4
– Remove switch shaft on filter
base, b 11.1
2410RA170 TG
1
3
2410RA220 TG
1
2
: Pull plug connector (1) out of the
carburetor support mount (arrow)
: Hold the jack (1), press the
tab (arrow) and pull out the
plug (2) – do not tug on the leads
– Turn the carburetor a little in the
direction of the control handle
– Do not overextend fuel hose
: Remove the plug (1)
2410RA171 TG
1
2410RA172 TG
2 1
2410RA173 TG
1