Operation Manual

26 MS 241 C
– Press and hold the trigger
interlock down completely
Brake band (1) must rest against
the crankcase (arrows) without play
and the clutch drum must rotate
freely.
– Release trigger interlock
: Press trigger interlock (1) gently
to check the play
– The play must not exceed the
mark (a)
Play: is equal to the distance
traveled by the trigger interlock (1)
without causing the brake lever to
move at the same time.
Play is necessary to ensure trouble
free functioning of the coasting
brake.
– Troubleshooting, b 3.2
2410RA038 TG
1
a
0001RA456 TG
1
Adjust brake cable
: Remove screw (1)
: Lower tank housing (2)
: Loosen clamping screw (1) on
the support for the brake cable
The sleeve (1) must be seated on
the adjusting screw (2) as far as it
will go.
: Position open-end wrench SW 6
on the adjusting screw (2) and
adjust play
2410RA039 TG
1
2
2310RA050 TG
1
2410RA556 TG
2
3
1
: Screw in adjusting screw (2)
– Play increases
: Unscrew adjusting screw (2)
– Play decreases
: Once play is adjusted correctly,
tighten clamping screw (3)
– Press and hold the trigger
interlock down completely
Brake band (1) must rest against
the crankcase (arrows) without play
and the clutch drum must rotate
freely.
– Reassemble remaining parts in
reverse order
2410RA038 TG
1