Operation Manual

21MS 241 C
Installation
– Release the chain brake
: Attach brake band (1) to brake
lever (2) sideways and turn it
towards its mount
: Insert brake cable (1) in
guide (arrow)
– Block chain brake
: Guide brake band (1) over
studs (arrows) and press it into
the mount
2410RA009 TG
2
1
2410RA010 TG
1
2410RA011 TG
1
: Push brake band (1) fully home in
the mount (arrow)
: Screw in and tighten screw (2) on
the bottom of the machine
: Insert cover (1)
: Insert and tighten down the
screws (2)
– Install the clutch drum, b 4.1
When the chain brake is released,
the clutch drum must rotate freely.
– Carry out additional function
tests, b 5.1
– Reassemble remaining parts in
reverse order
2410RA012 TG
2
1
2410RA013 TG
21
2
5.3 Brake lever
– Troubleshooting, b 3.2
– Remove shroud, b 6.4
– Remove fan housing, b 9.2
– Remove brake band, b 5.2
– Block chain brake
The brake spring is now relaxed.
: Use the assembly tool
1117 890 0900 to unhook the
brake spring (1) at the anchor
pin (arrow)
– Unhook and remove the brake
spring at the brake lever
2410RA014 TG
1