Operation Manual

169MS 241 C
: Position insulating tube (1) with
plug connection at the edge of
the tank housing and push it into
the guide (arrow) as far as it will
go
: Orient cover (1) so that the
pegs (2) engage the holes and
the tab (3) engages the
fin (arrows)
– Replace cover, insert and tighten
screw
– Ensure that wires are not
pinched
2410RA439 TG
1
3
1
2
2
2410RA440 TG
The thin connecting lead must be
run underneath the thick connecting
lead.
: Starting at the cover (1) of the
plug connections, route the leads
and press them into the
guide (arrow)
: Press plug connection (2) of the
thin connecting lead into the right
guide and plug connection (3) of
the thick connecting lead into the
left guide of the handle
– Reassemble remaining parts in
reverse order
2410RA441 TG
1
2
3