Operation Manual

ManualsBrandsSTIHL ManualsChainsawsSTIHL MS 241 C-M

157MS 241 C

: Orient socket terminal of the

ground wire so that the connector

tab (1) points toward the

carburetor and the flat

faces (arrows) engage between

the fins (2) of the holder

– Position socket terminal at the

holder

: To ensure correct switch position,

orient the heating switch (1) so

that the groove faces the

pin (arrow)

: Push the heating switch (1)

through the contact ring of the

ground wire into the hole of the

holder (2)

2410RA387 TG

1

2

2410RA388 TG

2

1

: Fit washer (1)

: Tightly screw on nuts (2)

: Position ground wire (1) so that

the crimped side (arrow) of the

cable lug faces upward

: Screw in the screw (2) and

tighten it

– Checking correct functioning

: Press ground wire (1) as far as it

will go into the guide (arrow)

2410RA389 TG

21

2410RA390 TG

2

1

2410RA391 TG

1

: Push the contact sleeve (1) into

the heating switch (2) as far as it

will go

: Press lead (1) into the

guides (arrows)

: Push on blade receptacle (1) so

that the crimped side faces the

carburetor

– Reassemble remaining parts in

reverse order

2410RA392 TG

1 2

2410RA393 TG

1

2410RA394 TG

1