Operation Manual

151MS 241 C
Versions with QuickStop Super
: Push the brake cable (1) with the
short hook (4) in front past the
right side of the fuel hose (3) and
through the opening (arrow)
Versions with manual fuel pump
: Push the brake cable (1) with the
short hook (4) in front past the
right side of the fuel hose (3) and
the fuel return line (2) and
through the opening (arrow)
: Push brake cable (1) with short
hook (2) in front through the
hole (arrow) in the crankcase
2410RA542 TG
4
1
2
3
2410RA543 TG
11 2
All versions
– Install air guide shroud, b 13.4
Versions with manual fuel pump,
b 13.4.1,
Versions with heating, b 13.4.2
: Insert antivibration spring (1)
through the opening (arrow) in
the crankcase
2310RA416 TG
1
: Raise tank housing (2)
: Screw in the screw (1) and
tighten it
– Install the front handle, b 10.4
Versions with heating, b 10.4.1
– Versions with QuickStop Super,
hook on brake cable at brake
lever, b 5.4
– Install the carburetor support,
b 13.8
– Install the carburetor, b 13.5
– Install actuating lever, b 11
– Reassemble remaining parts in
reverse order
2310RA417 TG
1
2