Operation Manual

149MS 241 C
: Press the lugs (arrows) together
and push out the fuel pump (1)
– Examine fuel pump and replace
if necessary
Installation
: Orient fuel pump (1) so that the
tab (3) faces the recess (arrow)
: Press fuel pump (1) into
holder (2) until the lugs engage
2410RA535 TG
1
1
2410RA536 TG
32
: Push holder (1) with fuel
pump (2) as far as it will go into
the guides (arrows) of the air
guide shroud
: Push the fuel return hose (1) onto
the long connector (2) as far as it
will go
: Push the fuel suction hose (3)
onto the short connector (4) and
the connector (5) on the
carburetor as far as it will go
– Check correct functioning
– Fuel must be drawn in when the
fuel pump is actuated
– Reassemble remaining parts in
reverse order
2410RA537 TG
1 2
3
2410RA531 TG
1 2
45
13.11.5 Tank housing
– Empty the fuel tank, b 1
– Remove the front handle,
b 10.4
Versions with heating, b 10.4.1
– Remove the carburetor, b 13.5
– Remove carburetor support,
b 13.8
– Remove the air guide shroud,
b 13.4
Versions with manual fuel pump,
b 13.4.1,
Versions with heating, b 13.4.2
– Versions with QuickStop Super,
unhook brake cable at brake
lever, b 5.4
– Remove actuating lever, b 11
: Remove screw (1)
2410RA557 TG
1