Operation Manual

148 MS 241 C
Fuel return line (1) must be
underneath the brake cable (2) and
run around the brake cable in
accordance with the illustration.
: Install fuel hose (1), b 13.11.2
– Install air guide shroud,
b 13.4.1
– Install the carburetor support,
b 13.8
– Install the carburetor, b 13.5
2410RA554 TG
2
1
2410RA555 TG
1
: Push the new fuel return line (1)
into the long connector (2) as far
as it will go
: Push the new fuel suction
hose (3) onto the short
connector (4) and the
connector (5) on the carburetor
as far as it will go
– Check correct functioning
– Fuel must be drawn in when the
fuel pump is actuated
: Press fuel return line (1)
completely into the guide (arrow)
– Check proper functioning with
manual fuel pump, b 13.11.4
– Reassemble remaining parts in
reverse order
3
2410RA531 TG
1 2
45
2410RA532 TG
1
13.11.4 Manual fuel pump
– Remove shroud, b 6.4
: Disconnect the fuel suction
hose (1) and fuel return line (2)
from the connectors (arrows)
– Replace fuel hoses, b 13.11.3
: Push holder (1) with fuel
pump (2) out of the
guides (arrows) of the air guide
shroud
2410RA533 TG
2
1
2410RA534 TG
1 2