Operation Manual

147MS 241 C
: Pull out connector (1) with fuel
return line (2)
: Remove connector (1) from fuel
return line (2)
: Pry out grommet (1)
– Replace fuel return line, check
connectors and grommet and
replace if necessary
2410RA529 TG
2
1
2310RA393 TG
1
2
2410RA550 TG
1
: Remove fuel suction hose (1),
b 13.11.2
Installation
: Install fuel suction hose (1),
b 13.11.2
– Use STIHL press fluid to simplify
assembly, b 16
: Press grommet (1) into
hole (arrow) of the fuel tank until
it encloses the hole completely
2410RA530 TG
1
2410RA551 TG
1
2410RA552 TG
1
: Push the connector (1) into the
fuel return line (2) as far as it will
go
Versions with QuickStop Super
: Guide the fuel return line (1)
connector-first under the brake
cable (2)
: Guide the connector (3) with the
fuel return line (1) between the
ribs (arrows) and push it into
grommet (4)
2310RA399 TG
1
2
2410RA553 TG
1
2
3
4