Operation Manual

130 MS 241 C
: Pull off carburetor (1) slightly and
pull lead (2) out of the
guide (arrow)
: Disconnect the fuel hose (1) from
the connector (arrow).
: Pull insulating tube (1) with plug
connection out of the
guide (arrow), slide insulating
tube (1) in direction of the
thermostatic switch and
disconnect plug connection
: Pull off carburetor (2) with
switchgear (3) and thermostatic
switch (4)
2410RA470 TG
1
2
2410RA488 TG
1
2410RA489 TG
4
2
1 3
All versions
: Disconnect the fuel hose (1) from
the connector (arrow).
: Pull off carburetor (1) with
switchgear (2)
– Remove switchgear at the
carburetor, b 8.4
: Check ring (1) and sealing
ring (2) and replace if necessary
: Check connector (3) – in case of
a damaged connector (3), the
carburetor must be replaced
2410RA488 TG
1
2410RA491 TG
1
2
2410RA492 TG
1
2
3
– Examine the carburetor and
repair or replace it if necessary,
b 13.5, b 13.6
– Replace fuel hose, b 13.11.2
Versions with manual fuel pump
– Replace fuel suction hose,
b 13.11.3
Installation
Versions with manual fuel pump
: Check seat of the fuel return
line (1), if necessary. press it
completely into the
guides (arrows)
Versions with heating
: Check seat of the heating switch
lead (1) and generator lead (2), if
necessary. press completely into
the guides (arrows)
2410RA493 TG
1
2410RA494 TG
1
2