Operation Manual

ManualsBrandsSTIHL ManualsChainsawsSTIHL MS 241 C-M

125MS 241 C

: Press out the grommet (1) of the

generator lead (2) in the direction

of the generator and pull the

generator lead (2) out of the

hole (arrow)

– Pull the grommet off of the

generator lead – to make it

easier, twist the grommet while

pulling it off

: Pull the fuel hose (1) out of the air

guide shroud

: Pull the wiring harness (2) out of

the air guide shroud through the

grommet (3)

– Remove air guide shroud with

heating switch and ground wire

2410RA463 TG

2

1

2410RA464 TG

3

1

2

: Ease out grommet (1) and

examine it, replace if necessary

: Remove ground wire (1) from the

guide (arrow)

: Push the holder (2) with the

heating switch out of the mount

– Examine heating switch and

replace if necessary, b 14.4

– Examine ground wire and

replace if necessary, b 14.4

– Replace fuel hose, b 13.11.2

2410RA465 TG

1

2410RA466 TG

2

1

Installation

– Pull out the shutter and inspect it,

replace if necessary

: Slide the shutter (1) into the

guide until it snaps into place

– To simplify installation, coat the

outside of the grommet with

STIHL press fluid, b 16

: Press grommet (1) into

hole (arrow) until it encloses the

hole completely

2410RA467 TG

1

2410RA468 TG

1