Operation Manual

124 MS 241 C
: Pull contact sleeve (1) out of
heating switch (2)
: Remove lead (1) from the
guides (arrows)
: Remove plug connection with
insulating tube (2) and generator
lead (1) from the guides (arrows)
2
2410RA454 TG
1
2410RA455 TG
1
2410RA456 TG
1
2
: Slide insulating tube (1) towards
generator and disconnect plug
connection
: Pull insulating tube (1) off of the
generator lead (2)
: Remove screws (3)
: Press the grommet (arrow) of the
fuel hose (1) downward and out
2410RA457 TG
1
2410RA458 TG
1 2
3 3
2410RA459 TG
1
: Press tab (1) in the direction of
the clutch side and pry the air
guide shroud (2) out of the mount
: Press tab (1) in the direction of
the ignition side and pry the air
guide shroud (2) out of the mount
: Press the manifold flange (1) out
of the air guide shroud (2) by
hand in the direction of the
cylinder while pulling the air guide
shroud out of the mounts
2410RA460 TG
1
2
2410RA461 TG
1
2
2410RA462 TG
1
2