Operation Manual

111MS 241 C
: Press the throttle rod (1) into the
guide (2) on the carburetor
support until it snaps into place
– Install handle molding and trigger
interlock, b 11.2, QuickStop
Super, b 11.3
– Push carburetor with attached
fuel hose onto the studs, b 8.4
– Install filter base, b 13.3
– Check correct functioning
– when the throttle trigger is
actuated, the throttle trigger must
move upwards at the carburetor
– Reassemble remaining parts in
reverse order
2
1
2310RA296 TG