Operation Manual

60 MS 240, MS 260, MS 260 C
Versions with handle heating
: Push the pin and socket
connector into the guides
(arrows).
: Position the wire (1) behind the
pin and socket connector.
– Install the carburetor, b 14.2
– Reassemble all other parts in the
reverse sequence.
– Tightening torques, b 3.5
– Check operation.
165RA209 TG
165RA497 TG
1
9.6.3 Ground Wire
A faulty ground wire may impair or
prevent operation of the short circuit
wire.
The ground wire is combined with
the short circuit wire in a wiring
harness. If damaged, the complete
wiring harness must be replaced
– Check for contact and continuity
and
replace wiring harness if
necessary, b 9.6.2
Versions with handle heating,
b 15.8