Instruction Manual
Table Of Contents
- STIHL MS 231, 251
- 1 Guide to Using this Manual
- 2 Safety Precautions
- 3 Reactive Forces
- 4 Working Techniques
- 5 Cutting Attachment
- 6 Mounting the Bar and Chain (side chain tensioner)
- 7 Mounting the Bar and Chain (quick chain tensioner)
- 8 Tensioning the Saw Chain (side chain tensioner)
- 9 Tensioning the Saw Chain (quick chain tensioner)
- 10 Checking Chain Tension
- 11 Fuel
- 12 Fueling
- 13 Chain Lubricant
- 14 Filling Chain Oil Tank
- 15 Checking Chain Lubrication
- 16 Chain Brake
- 17 Winter Operation
- 18 Starting / Stopping the Engine
- 18.1 Positions of Master Control Lever
- 18.2 Setting the Master Control Lever
- 18.3 Fuel pump
- 18.4 Holding the Saw
- 18.5 Cranking
- 18.6 Starting the Saw
- 18.7 When engine begins to fire
- 18.8 As soon as the engine runs
- 18.9 At very low outside temperatures
- 18.10 Stopping the engine
- 18.11 If the engine does not start
- 19 Operating Instructions
- 20 Taking Care of the Guide Bar
- 21 Shroud
- 22 Air Filter System
- 23 Cleaning the Air Filter
- 24 Adjusting the Carburetor
- 25 Spark Plug
- 26 Storing the Machine
- 27 Checking and Replacing the Chain Sprocket
- 28 Maintaining and Sharpening the Saw Chain
- 29 Maintenance and Care
- 30 Minimize Wear and Avoid Damage
- 31 Main Parts
- 32 Specifications
- 33 Ordering Spare Parts
- 34 Maintenance and Repairs
- 35 Disposal
- 36 EC Declaration of Conformity
Fuel mixture deteriorates with age – mix only as
much as needed for a few weeks. Do not store
fuel mixture for longer than 30 days. The fuel
mixture can become unusable more quickly if
exposed to light, sunlight or low or high tempera‐
tures.
STIHL MotoMix however can be stored for up to
5 years without any problems.
► Shake the canister containing the fuel mixture
thoroughly before refueling
WARNING
Pressure may have built up in the canister –
open it carefully.
► The fuel tank and the canister in which fuel
mixture is stored should be cleaned thoroughly
from time to time
Residual fuel and the liquid used for cleaning
must be disposed of in accordance with regula‐
tions and without harming the environment!
12 Fueling
12.1 Preparing the machine
001BA229 KN
► Before fueling, clean the cap and the area
around it to ensure that no dirt falls into the
fuel tank
► Always position the machine so that the cap is
facing upwards
12.2 Opening
001BA236 KN
► Raise grip to vertical position.
001BA232 KN
► Turn the cap counterclockwise (about a quar‐
ter turn).
001BA234 KN
Marks on tank cap and fuel tank must line up.
001BA237 KN
► Remove the tank cap.
English 12 Fueling
20 0458-737-0121-C