Owner's Manual

MS 210, MS 210 C, MS 230, MS 230 C, MS 250, MS 250 C
English
48
N Take out the screws (1).
N Push the hand guard upwards.
N Pull the underside of the fan
housing away from the crankcase
and remove it downwards.
Versions with Easy2Start
N Use circlip pliers to carefully remove
the circlip (2).
N Pull off the washer (3), carrier (4),
spring housing (5) and washer (6).
If suitable circlip pliers are not available,
have the starter rope or rewind spring
replaced by your servicing dealer.
Standard versions
N Remove the spring clip (7).
N Carefully remove the rope rotor with
washer (8) and pawl (9).
WARNING
The rewind spring may pop out and
uncoil during this operation – take care
to avoid the risk of injury.
Versions with Easy2Start
N Remove the spring clip (7).
N Carefully remove the rope rotor with
washer (8) and pawls (9).
WARNING
The rewind spring may pop out and
uncoil during this operation – take care
to avoid the risk of injury.
Replacing the Starter Rope
and Rewind Spring
1
1
1
1
133BA014 KN
208BA012 KN
2
3
4
5
6
7
8
9
208BA013 KN
7
8
9
208BA017 KN
9