Instruction Manual

MS 171, MS 171 C, MS 181, MS 181 C, MS 211, MS 211 C
English
50
Sprocket
Cutting attachment MS 181, MS 181 C
The actual bar length may be less than
the specified bar length.
STIHL cutting attachments complying
with CSA Standard Z 62.3:
Rollomatic E guide bars
Saw chains 3/8" Picco
Sprocket
Cutting attachment MS 211, MS 211 C
The actual bar length may be less than
the specified bar length.
STIHL cutting attachments complying
with CSA Standard Z 62.3:
Rollomatic E guide bars
Saw chains 3/8" Picco
Sprocket
Additional cutting attachments
Other cutting attachments complying
with CSA Standard Z 62.3 are available:
see section CSA-Standard Z 62.3,
"Information Sheet" in saw chain
packaging or ask a STIHL servicing
dealer.
Your STIHL servicing dealer will be
happy to help you properly match your
engine with the appropriate bar/chain
combinations to reduce the risk of
kickback injury.
Please enter your saw model, serial
number as well as the part numbers of
the guide bar and saw chain in the
spaces provided. This will make re-
ordering simpler.
The guide bar and saw chain are subject
to normal wear and tear. When
purchasing these parts, always quote
the saw model, the part numbers and
names of the parts.
6-toothed for 3/8" P (spur chain
sprocket)
Bar lengths: 30, 35, 40 cm
Pitch: 3/8" P (9.32 mm)
Groove width: 1.3 mm
Sprocket nose: 9-toothed
Picco Micro 3 (63 PM3) Type 3636
Pitch: 3/8"P (9.32 mm)
Drive link gauge: 1.3 mm
6-toothed for 3/8" P (spur chain
sprocket)
Bar lengths: 30, 35, 40 cm
Pitch: 3/8" P (9.32 mm)
Groove width: 1.3 mm
Sprocket nose: 9-toothed
Picco Micro 3 (63 PM3) Type 3636
Picco Super 3 (63 PS3) Type 3616
Picco Duro 3 (63 PD3) Type 3612
Pitch: 3/8"P (9.32 mm)
Drive link gauge: 1.3 mm
6-toothed for 3/8" P (spur chain
sprocket)
Ordering Spare Parts
Model
Serial number
Guide bar part number
Chain part number