Instruction Manual

The following maintenance intervals apply for normal operat‐
ing conditions only. When working under difficult conditions
(high accumulation of dust, highly resinous lumber, lumber
from tropical trees, etc.) or longer than normal each day, the
specified intervals must be shortened accordingly. If you only
use the tool occasionally, extend the intervals accordingly.
Before starting work
At the end of work and/or daily
Whenever tank is refilled
Weekly
Monthly
Annually
If faulty
If damaged
As required
replace X
Safety information label replace X
32 Main Parts
10
4
13
14
6
3
1
12
9
8
2
5
7
11
7
8
20
26
25
21
19
16
15
17
18
22
23
24
#
533BA015 KN
1 Shroud slide
2 Carburetor adjusting screws
3
Manual fuel pump (Easy Start
1)
)
4 Slide (summer operation/ winter operation,
MS 211 only)
5 Chain brake
6 Chain sprocket
7 Chain sprocket cover
8 Chain catcher
9 Side chain tensioner
10 Bumper spike
11 Guide bar
12 Oilomatic saw chain
13 Adjusting wheel (quick tensioner)
14
Wings of the wing nut
1)
(quick tensioner)
15 Oil filler cap
16 Muffler
17 Front hand guard
18 Front handle (handlebar)
19 Spark plug boot
20 Starter grip
21 Fuel tank twist lock
22 Master Control lever
23 Throttle trigger
24 Throttle trigger interlock
25 Rear handle
26 Rear hand guard
# Serial number
33 Specifications
33.1 Engine
STIHL single cylinder two-stroke engine
33.1.1 MS 171, MS 171 C
Displacement:
31.8 cc
Bore: 38 mm
Stroke: 28 mm
1)
STIHL recommends STIHL servicing dealer
2)
When using professional chainsaws (with a power output of 3.4 kW or more) for the first time,
tighten the cylinder block screws after 10 to 20 hours of operation
1)
According to version
32 Main Parts English
0458-533-8321-E 41