Instruction Manual

MF-MM
English
10
Mounting and Removing the Deflector
Extensions
Mounting
N Slide both deflector extensions onto
the right and left sides of the
deflector, push them fully home at
the top and bottom and engage the
tab (1).
Removing
N Use the combination wrench to
disengage the tabs (1) and then pull
off the extensions.
WARNING
The deflector extensions divert removed
material and debris away from the
machine and the operator. Never work
without a properly mounted deflector
extensions.
Installing and Removing the Mud Flap
N Secure the mud flap (1) with
screw (2) and rotary knob (3) to the
right-hand side of the flange.
N Adjust the mud flap to the required
length so that it overlaps the
deflector.
N Tighten down the rotary knob firmly.
WARNING
The mud flap diverts removed material
and debris away from the machine and
the operator. Never work without a
properly mounted mud flap.
Starting the Engine
Always follow the starting procedure
described in the MultiEngine instruction
manual.
N Secure the handlebar in the normal
operating position.
N Retract the wheels, if fitted – see
chapter on "Wheels" in MultiEngine
instruction manual.
N Retract the spur, if fitted.
Mounting the Deflector
1
1
483BA007 KN
3
483BA011 KN
2
Starting / Stopping the
Engine
469BA061 AS
469BA062 AS