Instruction Manual

KM 111 R, KM 131, KM 131 R
English
18
Maintenance and Care
The following intervals apply for normal operating conditions. If your daily working
time is longer or operating conditions are difficult (very dusty work area, etc.),
shorten the specified intervals accordingly.
before starting work after finishing work or daily after each refueling stop weekly monthly every 12 months if problem if damaged as required
Complete machine
Visual inspection (condition, leaks) XX
Clean X
Replace any damaged parts XX
Control handle Function test XX
Air filter
Visual inspection XX
Replace
1)
X
Manual fuel pump (if fitted)
Check X
Have repaired by servicing dealer
2)
X
Pickup body (filter) in fuel tank
Have checked by servicing dealer
2)
X
Have replaced by servicing dealer
2)
XXX
Fuel tank Clean XX
Carburetor
Check idle adjustment – the working/cut
-
ting attachment must not run
XX
Adjust idle speed X
Spark plug
Adjust electrode gap X
Replace after every 100 operating hours
Cooling air inlet
Visual inspection X
Clean X
Cylinder fins Have cleaned by servicing dealer
2)
X
Valve clearance
If power is low or cranking effort very
high, have valve clearance checked
and, if necessary, adjusted by servicing
dealer
2)
XX
Combustion chamber Have cleaned after every 150 hours of
operation by servicing dealer
2)
X