Instruction Manual

KB-MM, KW-MM
English
11
Installing the Bristle Brushes
N Push the bristle brush (5) onto the
axle (2) .
N Insert the hitch pin (6) in the hole at
the end of the axle and fold it flat.
N Use the same procedure to mount
the other bristle brush.
WARNING
Always mount both bristle brushes.
Installing the PowerSweep
N Push the sweeper drum (5) onto the
axle (2) – as shown .
N Insert the hitch pin (6) in the hole at
the end of the axle and fold it flat.
N Use the same procedure to mount
the other sweeper drum.
WARNING
Always mount both sweeper drums.
Deflector Extensions
Deflector extensions come standard
with the bristle brush and are available
as special accessories for the
PowerSweep.
Deflector extensions can only be
mounted to the large deflector – see
"Main Parts".
The left and right deflector extensions
are different.
Mounting the Deflector Extensions
N Slide the right-hand extension onto
the deflector, push it fully home at
the top and bottom and engage the
tab (1).
N Slide the left-hand extension onto
the deflector, push it fully home at
the top and bottom and engage the
tab (1).
Removing the Deflector Extensions
N Use the combination wrench to
disengage the tabs (1) and then pull
off the extensions.
Starting the Engine
Always follow the starting procedure
described in the MultiEngine instruction
manual.
N Secure the handlebar in the normal
operating position.
N Retract the wheels, if fitted – see
chapter on "Wheels" in MultiEngine
instruction manual.
N Retract the spur, if fitted.
6
2
486BA009 KN
5
6
2
487BA004 KN
5
1
1
487BA005 KN
Starting / Stopping the
Engine
469BA061 AS
469BA062 AS