Instruction Manual

KB-MM, KW-MM
English
9
Removing Existing MultiTools
WARNING
Wear gloves to reduce the risk of injury
from contact with sharp MultiTools
and/or hot surface of gearbox.
N Remove the hitch pins and pull the
MultiTools (if fitted) off the axle –
see also "Mounting the MultiTool" in
the instruction manual of the other
MultiTool.
N Clean the gearbox if necessary.
Checking Deflector
WARNING
To reduce the risk of injury from thrown
objects, operate the KB-MM bristle
brush only with the deflector shown and
with properly mounted deflector
extensions.
Changing the Deflector
Removing the Gearbox
N Loosen the clamp screws (1) and
pull the gearbox (2) off the drive
tube.
Removing the Deflector
N Loosen the screw (3) and pull the
deflector (4) off the drive tube.
Mounting the MultiTool
481BA008 KN
486BA011 KN
1
486BA012 KN
2
1
3
486BA013 KN
4