Instruction Manual

0458-766-9821-D
62
English 15 Storing
15.1 Storing the Pole Pruner
► Switch off the pole pruner, push retaining latch to position
and remove the battery.
► Fit the scabbard so that it completely covers the guide bar.
► Check the following points when storing the pole pruner:
– Pole pruner is out of the reach of children.
– Pole pruner is clean and dry.
► If you store the pole pruner for more than 3 months:
Remove the bar and chain.
15.2 Storing the Battery
STIHL recommends that you store the battery with a charge
between 40% and 60% (2 LEDs glow green).
► Check the following points when storing the battery:
– Battery is out of the reach of children.
– Battery is clean and dry.
– Battery is in an enclosed location.
– Battery is stored separately from the pole pruner and
charger.
– Battery is in non-conductive packaging.
– Battery is in a temperature range between -10°C and
+50°C.
16.1 Cleaning the Pole Pruner
► Switch off the pole pruner, push retaining latch to position
and remove the battery.
► Clean the pole pruner with a damp cloth or STIHL resin
solvent.
► Remove the chain sprocket cover.
► Clean the area around the sprocket with a damp cloth or
STIHL resin solvent.
► Fit the chain sprocket cover.
16.2 Cleaning the Bar and Chain
► Switch off the pole pruner, push retaining latch to position
and remove the battery.
► Remove the bar and chain.
► Clean the oil port (1), oil inlet hole (2) and bar groove (3)
with a soft brush or STIHL resin solvent.
► Clean the saw chain with a soft brush or STIHL resin
solvent.
► Mount the bar and chain.
16.3 Cleaning the Battery
► Clean the battery with a damp cloth.
17.1 Deburring the Guide Bar
A burr can build up on the outer edge of the guide bar.
► Remove burr with a flat file or a STIHL guide bar dressing
tool.
► If you have any queries: Contact your STIHL servicing
dealer.
15 Storing
16 Cleaning
17 Maintenance
3
1
2
3
0000-GXX-4767-A0