Instruction Manual
Table Of Contents
- 1 Introduction
- 2 Guide to Using this Manual
- 3 Overview
- 4 Safety Precautions
- 5 Preparing Pole Pruner for Operation
- 6 Charging the Battery, LEDs
- 7 Assembling the Pole Pruner
- 8 Removing and Fitting the Battery
- 9 Switching Pole Pruning On and Off
- 10 Checking Pole Pruner and Battery
- 11 Using the Pole Pruner
- 12 After Finishing Work
- 13 Transporting
- 14 Storing
- 15 Cleaning
- 16 Maintenance
- 17 Repairing
- 18 Troubleshooting
- 19 Specifications
- 20 Bar and Chain Combinations
- 21 Combinations of Carrying Systems
- 22 Spare Parts and Accessories
- 23 Disposal
- 24 EC Declaration of Conformity
- 25 General Power Tool Safety Warnings
0458-698-0121-A
5
English
4 Safety Precautions
4.1 Warning Symbols
Meanings of warning symbols on the pole pruner or battery:
This icon shows the direction of rotation of the
saw chain.
Rotate in this direction to increase the saw chain
tension
1 LED lights up red. The battery is too warm or
too cold.
This icon marks the release slide.
4 LEDs flashing red. There is a fault in the
battery.
Guaranteed sound power level in accordance
with Directive 2000/14/EC in dB(A) for the
purpose of comparing the sound emissions of
products.
The information next to the symbol indicates the
energy content of the battery according to the cell
manufacturer’s specification. The energy content
available in operation is lower.
Do not dispose of the product with domestic waste.
4 Safety Precautions
Observe safety notices and take the necessary
precautions.
L
W
A
Read, understand and keep the User Manual.
Wear safety glasses, hearing protection and a
hard hat.
Wear safety boots.
Wear work gloves.
Maintain a safety distance.
Remove the battery during work stoppages,
transport, storage, maintenance or repair.
Protect battery from heat and fire.
Do not immerse battery in fluids.










