Operation Manual

23HT 70, HT 75
english
Controls
Throttle trigger interlock (1), throttle
trigger (2) and slide control (3) with the
positions:
START (4)
The normal run position # (5)
and
$ – STOP (6) for stopping the engine..
Starting
: Hold down the trigger interlock and
squeeze the throttle trigger.
: Keep both levers in that position.
: Move the slide control to START
position and hold it there.
: Now release the throttle trigger,
slide control and trigger interlock in
that order. This is the
starting-throttle position.
If engine is cold:
Set the choke lever (8) to g
If engine is warm:
Set the choke lever (8) to e
Also use this setting if engine has been
running but is still cold.
: Press the fuel pump bulb (9) at least
five times, even if the bulb is still
filled with fuel.
Starting / Stopping
the Engine
3
2
3
1
STOP
4
5
6
002BA149 KN
393BA017 KN
8
8
393BA018 KN
9