Operation Manual

45HT 70, HT 75
english
Guard
Guard kit 4138 007 1003 for mounting to
and protecting the powerhead when the
machine is put down. Also for resting
machine on right thigh during operation.
30° angle drive
For applications in which an angled
cutting attachment is an advantage for
horizontal cuts or better control.
Sharpening tools
Filing gauge
Flat file
File holder with round file
Round file
Gauge
Reference gauge for chain sprocket
Other special accessories
Safety glasses
Harness
HT full harness (with sling)
Carburetor screwdriver
Combination wrench
STIHL lubricating grease
STIHL ElastoStart (starter rope with grip)
Special resin-free lubricating oil
Contact your STIHL dealer for the latest
information on these and other special
accessories.
The user of this unit should carry out
only the maintenance operations
described in this manual. Other repair
work may be performed only by an
authorized STIHL dealer.
Warranty claims following repairs can be
accepted only if the repair has been
performed by an authorized STIHL
dealer using original STIHL replacement
parts.
Original STlHL parts can be identified by
the STIHL part number, the
STIHl
logo and the STlHL parts symbol (.
The symbol may appear alone on small
parts.
Special Accessories
386BA011 KN
386BA013 KN
Maintenance and Repairs