Operation Manual

29HT 250
English / USA
Dirty air filters reduce engine power,
increase fuel consumption and make
starting more difficult.
If there is a noticeable loss of engine
power
: Set the choke knob to g
: Press in the tab (1) and pull off the
filter cover (2).
: Clean away loose dirt from inside
the filter cover and around the filter
element (3).
: Remove the filter element and
inspect it – if it is dirty or damaged,
fit a new one.
Replace any damaged parts.
: Install the filter element in the filter
housing
: Fit the filter cover.
Exhaust emissions are controlled by the
design of the fundamental engine
parameters and components (e.g.
carburation, ignition, timing and valve or
port timing) without the addition of any
major hardware.
Replacing the Air Filter
1
2
3
250BA022 KN
Motor Management