Instruction Manual
Table Of Contents
- 1 Vorwort
- 2 Informationen zu dieser Gebrauchsanleitung
- 3 Übersicht
- 4 Sicherheitshinweise
- 5 Heckenschere einsatzbereit machen
- 6 Heckenschere für den Benutzer einstellen
- 7 Stecker der Anschlussleitung einstecken und herausziehen
- 8 Heckenschere einschalten und ausschalten
- 9 Heckenschere prüfen
- 10 Mit der Heckenschere arbeiten
- 11 Nach dem Arbeiten
- 12 Transportieren
- 13 Aufbewahren
- 14 Reinigen
- 15 Warten
- 16 Reparieren
- 17 Störungen beheben
- 18 Technische Daten
- 19 Ersatzteile und Zubehör
- 20 Entsorgen
- 21 EU-Konformitätserklärung
- 22 Anschriften
- 23 Allgemeine Sicherheitshinweise für Elektrowerkzeuge
- 1 Introduction
- 2 Guide to Using this Manual
- 3 Overview
- 4 Safety Precautions
- 5 Preparing Hedge Trimmer for Operation
- 6 Adjusting Hedge Trimmer for User
- 7 Inserting and Removing Connecting Cable Plug
- 8 Switching the Hedge Trimmer On/Off
- 9 Checking the Hedge Trimmer
- 10 Operating the Hedge Trimmer
- 11 After Finishing Work
- 12 Transporting
- 13 Storing
- 14 Cleaning
- 15 Maintenance
- 16 Repairing
- 17 Troubleshooting
- 18 Specifications
- 19 Spare Parts and Accessories
- 20 Disposal
- 21 EC Declaration of Conformity
- 22 General Power Tool Safety Warnings
- 1 Préface
- 2 Informations concernant la présente Notice d'emploi
- 3 Vue d'ensemble
- 4 Prescriptions de sécurité
- 4.1 Symboles d'avertissement
- 4.2 Utilisation conforme à la destination prévue
- 4.3 Exigences posées à l'utilisateur
- 4.4 Vêtements et équipement
- 4.5 Aire de travail et voisinage
- 4.6 Bon état pour une utilisation en toute sécurité
- 4.7 Utilisation
- 4.8 Transport
- 4.9 Rangement
- 4.10 Nettoyage, entretien et réparation
- 5 Préparatifs avant l'utilisation du taille- haies
- 6 Ajustage du taille-haies selon l'utilisateur
- 7 Branchement et débranchement de la fiche du cordon d'alimentation électrique
- 8 Mise en marche et arrêt du taille-haies
- 9 Contrôle du taille-haies
- 10 Travail avec le taille-haies
- 11 Après le travail
- 12 Transport
- 13 Rangement
- 14 Nettoyage
- 15 Maintenance
- 16 Réparation
- 17 Dépannage
- 18 Caractéristiques techniques
- 19 Pièces de rechange et accessoires
- 20 Mise au rebut
- 21 Déclaration de conformité UE
- 22 Indications générales de sécurité pour outils électroportatifs
- 22.1 Introduction
- 22.2 Sécurité à l'endroit de travail
- 22.3 Sécurité sur le plan électrique
- 22.4 Sécurité des personnes
- 22.5 Utilisation et emploi soigneux d'outils électroportatifs
- 22.6 Utilisation et emploi soigneux d'outils électroportatifs sans fil
- 22.7 Service après-vente
- 22.8 Consignes de sécurité applicables aux taille- haies
- 1 Premessa
- 2 Informazioni sulle presenti Istruzioni d’uso
- 3 Sommario
- 4 Avvertenze di sicurezza
- 5 Preparare il tagliasiepi per l'esercizio
- 6 Regolazione della tagliasiepi per l’utente
- 7 Inserire la spina del cavo di collegamento ed estrarla
- 8 Accendere e spegnere il tagliasiepi
- 9 Controllo della tagliasiepi
- 10 Lavorare con il tagliasiepi
- 11 Dopo il lavoro
- 12 Trasporto
- 13 Conservazione
- 14 Pulizia
- 15 Manutenzione
- 16 Riparazione
- 17 Eliminazione dei guasti
- 18 Dati tecnici
- 19 Ricambi e accessori
- 20 Smaltimento
- 21 Dichiarazione di conformità UE
- 22 Avvertenze di sicurezza generali per attrezzi elettrici
- 1 Voorwoord
- 2 Informatie met betrekking tot deze handleiding
- 3 Overzicht
- 4 Veiligheidsinstructies
- 5 Heggenschaar klaar maken voor gebruik
- 6 Heggenschaar voor de gebruiker instellen
- 7 De stekker van de aansluitkabel erin steken en eruit trekken
- 8 Heggenschaar inschakelen en uitschakelen
- 9 Heggenschaar controleren
- 10 Met de heggenschaar werken
- 11 Na de werkzaamheden
- 12 Vervoeren
- 13 Opslaan
- 14 Reinigen
- 15 Onderhoud
- 16 Repareren
- 17 Storingen opheffen
- 18 Technische gegevens
- 19 Onderdelen en toebehoren
- 20 Milieuverantwoord afvoeren
- 21 EU-conformiteitsverklaring
- 22 Algemene veiligheidswaarschuwingen voor elektrische gereedschappen
0458-005-9621-A
41
English
7 Inserting and Removing Connecting Cable Plug
► Feed strap (1) back through the ring (2) and the belt (3).
► Close the Velcro® fastening on the strap (1).
► Push battery (4) as far as it will go into the belt bag (5).
A short beep will sound.
► Secure battery (4) with the Velcro® fastening (6).
6.3.2 Adjusting the Connecting Cable
The connecting cable can be fitted and adjusted to suit the
user’s size and the application.
The length of the connecting cable can be adjusted by
making a loop (1) and securing it to the belt bag (3) with the
fastener (2).
► Arrange the connecting cable so that it is as short as
possible without hindering your work.
7.1 Inserting the Connecting Cable Plug
► Hold connecting cable plug (1) so that the arrow on its side
lines up with the arrow on the socket (2).
► Insert the connecting cable plug (1) in the socket (2).
The plug (1) engages in position.
3
0000-GXX-3416-A2
1
1
4
0000-GXX-3417-A2
6
5
7 Inserting and Removing Connecting
Cable Plug
2
0000-GXX-3418-A0
1
3
1
0000-GXX-2911-A0
2