Operation Manual

HSA 66, HSA 86
English
49
Cutting attachment
Weight
Noise and Vibration Data
Noise and vibration data are determined
on the basis of the rated maximum
speed.
For further details on compliance with
Vibration Directive 2002/44/EC see
www.stihl.com/vib/
Sound pressure level L
p
to
EN 60745
-
2
-
15
Sound power level L
w
to EN 60745
-
2
-
15
Vibration measurement a
hv
to
EN 60745
-
2
-
15
The K
-
factor in accordance with
Directive 2006/42/EC is 2.5 dB(A) for
the sound pressure level and sound
power level; the K
-
factor in accordance
with Directive 2006/42/EC is 2.0 m/s
2
for the vibration measurement.
The vibration values quoted above have
been measured according to a
standardized test procedure and may be
used to compare electric power tools.
Depending on the type of usage, the
vibrations that actually occur may differ
from the values quoted.
The vibration values quoted may be
used for an initial assessment of the
user's exposure to vibrations.
The actual exposure to vibrations has to
be evaluated. This process may also
take into account times during which the
electric power tool is switched off and
times during which it is switched on but
running without load.
Transporting
STIHL batteries comply with the
requirements laid down in UN
-
Manual
ST/SG/AC.10/11/Rev.5/Part III,
Subsection 38.3.
No further condition have to be fulfilled
by the user to transport STIHL batteries
by road to the power's tool operating
site.
Country-specific regulations must be
observed for transport by air or sea.
For further notes on transportation see
www.stihl.com/safety
-
data
-
sheets
REACH
REACH is an EC regulation and stands
for the Registration, Evaluation,
Authorisation and Restriction of
Chemical substances.
For information on compliance with the
REACH regulation (EC) No. 1907/2006
see www.stihl.com/reach.
Tooth spacing:
HSA 66: 30 mm
HSA 86: 33 mm
Stroke rate (off load): 3,000 rpm
Cutting lengths:
HSA 66: 500 mm
HSA 86: 450 mm
1)
620 mm
1)
Sharpening angle to
horizontal:
HSA 66: 35°
HSA 86: 45°
without battery, with cutting attachment,
without blade scabbard
HSA 66: 3.1 kg
HSA 86: 3.0 kg
2)
3.3 kg
3)
1)
Depending on model
2)
Version with 450 mm blade
3)
Version with 620 mm blade
HSA 66: 83 dB(A)
HSA 86: 83 dB(A)
HSA 66: 94 dB(A)
HSA 86: 94 dB(A)
Handle, left Handle, right
HSA 66: 3.7 m/s
2
2.3 m/s
2
HSA 86: 3.7 m/s
2
2.3 m/s
2