Operation Manual

0458-714-9621-B
45
English
10 Operating the Hedge Trimmer
If the trigger or trigger lockout is stiff or does not spring
back to the idle position: Do not use your hedge trimmer
and contact your STIHL servicing dealer.
Trigger or trigger lockout is faulty.
Switch Lever
Remove the battery.
Depress the switch lever and release it again.
If the switch lever is stiff or does not spring back to its idle
position: Do not use your hedge trimmer and contact your
STIHL servicing dealer.
The switch lever has a malfunction.
Switch on the hedge trimmer
Fit the battery.
Depress the switch lever and release it again.
If the cutting blades have run or are running: Do not use
your hedge trimmer and contact your STIHL servicing
dealer.
The trigger has a malfunction.
Depress the trigger lockout lever and hold it in that
position.
Pull the trigger and hold it there.
If the cutting blades run: Do not use your hedge trimmer
and contact your STIHL servicing dealer.
The switch lever has a malfunction.
Depress the switch lever and hold it in that position.
The cutting blades run.
If 3 LEDs flash red: Remove the battery and contact your
STIHL servicing dealer.
There is a malfunction in the hedge trimmer.
Release the switch lever.
The cutting blades stop running after about 1 second.
If the cutting blades continue to run after 1 second:
Remove the battery and contact your STIHL servicing
dealer.
Your hedge trimmer has a malfunction.
9.2 Testing the Battery
Press button on battery.
The LEDs glow or flash.
If the LEDs do not glow or flash: Do not use the battery
and contact your STIHL servicing dealer.
There is a malfunction in the battery.
10.1 Holding and Controlling the Hedge Trimmer
Hold the hedge trimmer with one hand on the control
handle – wrap your thumb around the control handle.
Hold the hedge trimmer with the other hand on the loop
handle – wrap your thumb around the loop handle.
10.2 Cutting
Use lopping shears or a chainsaw to cut out thick
branches first.
10 Operating the Hedge Trimmer
0000-GXX-1455-A0