Instruction Manual
Table Of Contents
- STIHL HSA 56
- 1 Introduction
- 2 Guide to Using this Manual
- 3 Overview
- 4 Safety Precautions
- 5 Preparing Hedge Trimmer for Operation
- 6 Charging the Battery, LEDs
- 7 Removing and Fitting the Battery
- 8 Switching the Hedge Trimmer On/Off
- 9 Testing the Hedge Trimmer and Battery
- 10 Operating the Hedge Trimmer
- 11 After Finishing Work
- 12 Transporting
- 13 Storing
- 14 Cleaning
- 15 Maintenance
- 16 Repairing
- 17 Troubleshooting
- 18 Specifications
- 19 Spare Parts and Accessories
- 20 Disposal
- 21 EC Declaration of Conformity
- 22 General Power Tool Safety Warnings
19 Spare Parts and Accesso‐
ries
19.1 Spare parts and accessories
These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
STIHL recommends the use of original STIHL
spare parts and accessories.
Despite ongoing market observation, STIHL is
unable to judge the reliability, safety and suitabil‐
ity of other manufacturers' spare parts and
accessories; accordingly, STIHL cannot warrant
for the use of those parts.
Original STIHL spare parts and original STIHL
accessories are available from STIHL dealers.
20 Disposal
20.1 Disposal of Hedge Trimmer,
Battery and Charger
Contact your STIHL servicing dealer for informa‐
tion on disposal.
► Dispose of the hedge trimmer, battery,
charger, accessories and packaging in accord‐
ance with local regulations and environmental
requirements.
21 EC Declaration of Con‐
formity
21.1 STIHL HSA 56 Hedge Trimmer
ANDREAS STIHL AG & Co. KG
Badstraße 115
D-71336 Waiblingen
Germany
declares under our sole responsibility that
–
Category: Cordless hedge trimmer
–
Manufacturer's brand: STIHL
–
Model: HSA 56
–
Serial number: 4521
conforms to the relevant provisions of Directives
2011/65/EU, 2006/42/EC, 2014/30/EU and
2000/14/EC and has been developed and manu‐
factured in compliance with the following stand‐
ards in the versions valid on the date of produc‐
tion: EN 55014-1, EN 55014-2, EN 60745-1 and
EN 60745-2-15.
Applied conformity assessment procedure in
accordance with Directive 2000/14/EC, Annex V.
–
Measured sound power level: 91 dB(A)
–
Guaranteed sound power level: 93 dB(A)
The technical documents are stored at
ANDREAS STIHL AG & Co. KG Produktzulas‐
sung.
The year of manufacture, country of manufacture
and serial number are applied to the pruning
shears.
Done at Waiblingen, 03.02.2020
ANDREAS STIHL AG & Co. KG
pp
Dr. Jürgen Hoffmann, Head of Product Data,
Regulations and Licensing
21.2 STIHL AL 101 Charger Con‐
formity Notice
This charger has been manufactured and put on
the market in accordance with the following
directives: 2014/35/EU, 2014/30/EU and
2011/65/EU.
The year of manufacture, country of manufacture
and serial number are applied to the blower.
The complete EC Declaration of Conformity is
available from ANDREAS STIHL AG & Co. KG,
Badstrasse 115, 71336 Waiblingen, Germany.
22 General Power Tool Safety
Warnings
22.1 Introduction
This chapter reproduces the pre-formulated, gen‐
eral safety precautions specified in the
IEC 62841 standard for hand-held motor-oper‐
ated electric tools.
STIHL is obliged to publish these texts.
The safety precautions and warnings on avoiding
an electric shock given under “Electrical Safety”
do not apply to STIHL cordless products.
WARNING
■ Read all the safety precautions, instructions,
illustrations and specifications accompanying
this electric power tool. Failure to follow the
safety warnings and instructions may result in
electric shock, fire and/or serious injury. Save
all safety warnings and instructions for future
reference.
English 19 Spare Parts and Accessories
18 0458-714-0121-C