Instruction Manual
Table Of Contents
- 1 Introduction
- 2 Guide to Using this Manual
- 3 Main Parts
- 4 Safety Symbols on the Products
- 5 General Power Tool Safety Warnings
- 6 IMPORTANT SAFETY INSTRUCTIONS
- 7 Charger Safety
- 8 Maintenance, Repair and Storage
- 9 Before Starting Work
- 10 Charging the Hedge Trimmer
- 11 LED Diagnostics
- 12 Inserting and Removing the Activation Key
- 13 Switching the Hedge Trimmer On and Off
- 14 Checking the Controls
- 15 During Operation
- 16 After Finishing Work
- 17 Transporting the Hedge Trimmer
- 18 Storing the Hedge Trimmer and Charger
- 19 Cleaning
- 20 Inspection and Maintenance
- 21 Troubleshooting Guide
- 22 Specifications
- 23 Replacement Parts and Equipment
- 24 Disposal
- 1 Préface
- 2 Indications concernant la présente Notice d'emploi
- 3 Principales pièces
- 4 Symboles de sécurité sur les produits
- 5 Indications générales de sécurité pour outils électroportatifs
- 6 CONSIGNES DE SÉCURITÉ IMPORTANTES
- 7 Sécurité du chargeur
- 8 Maintenance, réparation et rangement
- 9 Avant d'entreprendre le travail
- 10 Charge du taille-haies
- 11 Diagnostic à l'aide des DEL
- 12 Insertion et retrait de la clé d’activation
- 13 Mise en marche et arrêt du taille-haies
- 14 Vérification des commandes
- 15 Pendant l’utilisation
- 16 Après avoir terminé le travail
- 17 Transport du taille-haies
- 18 Entreposage du taille-haies et du chargeur
- 19 Nettoyage
- 20 Inspection et maintenance
- 21 Guide de dépannage
- 22 Spécifications
- 23 Pièces de rechange et équipement
- 24 Élimination
0458-717-8221-A
4
English
4 Safety Symbols on the Products
5 Push Button
Activates the hedge trimmer's LEDs.
6 Hedge Trimmer LEDs
Indicate the hedge trimmer's state of charge and display
error messages regarding potential malfunctions in the
power tool or its integrated battery.
7 Trigger Switch
Activates the cutting attachment when depressed in
combination with the switch lever.
8 Charging Socket
Socket for connecting the charger to the hedge trimmer.
9Activation Key
Enables the flow of electrical power from the integrated
battery to the motor.
10 Activation Key Socket
Socket for connecting the activation key to the hedge
trimmer.
11 Loop Handle
Handle for the operator's front hand.
12 Hand Guard
Helps protect the operator's front hand from projecting
branches and other materials and contact with the
cutting blades.
13 Cutting Blades
Steel blades for cutting hedges, shrubs and bushes.
14 Connector
Connects the charger to the hedge trimmer's charging
socket.
15 Power Supply Cord
Supplies electrical charging current when the charger is
plugged into a wall outlet.
16 Plug
Connects the charger to a wall outlet.
17 Charger (Power Supply)
Power supply for charging the hedge trimmer.
# Rating Plate
Contains electrical information and the product's serial
number.
4.1 Hedge Trimmer and Charger
The following safety symbols are found on the hedge
trimmer and/or charger:
4 Safety Symbols on the Products
To reduce the risk of injury, follow the specified
safety precautions.
Read and follow all safety precautions in the
instruction manual. Improper use can lead to
serious or fatal personal injury or property
damage.
To reduce the risk of eye injury, always wear
proper eye protection, @ 6.3.
To reduce the risk of cut injuries, keep hands,
feet and other body parts away from the cutting
blades, @ 6.6.4.
To reduce the risk of injury or property damage
from unintended activation, remove the
activation key any time the hedge trimmer is not
in use, @ 8.
To reduce the risk of personal injury or property
damage from a short circuit, fire or explosion,
keep the hedge trimmer dry. Protect it from rain,
water, liquids and damp conditions. Never
immerse the hedge trimmer in water or other
liquids, @ 6.4.