Instruction Manual
Table Of Contents
- 1 Introduction
- 2 Guide to Using this Manual
- 3 Main Parts
- 4 Safety Symbols on the Products
- 5 General Power Tool Safety Warnings
- 6 IMPORTANT SAFETY INSTRUCTIONS
- 7 Charger Safety
- 8 Maintenance, Repair and Storage
- 9 Before Starting Work
- 10 Charging the Hedge Trimmer
- 11 LED Diagnostics
- 12 Inserting and Removing the Activation Key
- 13 Switching the Hedge Trimmer On and Off
- 14 Checking the Controls
- 15 During Operation
- 16 After Finishing Work
- 17 Transporting the Hedge Trimmer
- 18 Storing the Hedge Trimmer and Charger
- 19 Cleaning
- 20 Inspection and Maintenance
- 21 Troubleshooting Guide
- 22 Specifications
- 23 Replacement Parts and Equipment
- 24 Disposal
- 1 Préface
- 2 Indications concernant la présente Notice d'emploi
- 3 Principales pièces
- 4 Symboles de sécurité sur les produits
- 5 Indications générales de sécurité pour outils électroportatifs
- 6 CONSIGNES DE SÉCURITÉ IMPORTANTES
- 7 Sécurité du chargeur
- 8 Maintenance, réparation et rangement
- 9 Avant d'entreprendre le travail
- 10 Charge du taille-haies
- 11 Diagnostic à l'aide des DEL
- 12 Insertion et retrait de la clé d’activation
- 13 Mise en marche et arrêt du taille-haies
- 14 Vérification des commandes
- 15 Pendant l’utilisation
- 16 Après avoir terminé le travail
- 17 Transport du taille-haies
- 18 Entreposage du taille-haies et du chargeur
- 19 Nettoyage
- 20 Inspection et maintenance
- 21 Guide de dépannage
- 22 Spécifications
- 23 Pièces de rechange et équipement
- 24 Élimination
0458-717-8221-A
3
English
3 Main Parts
WARNING
Indicates a hazardous situation that, if not avoided, could
result in death or serious injury.
NOTICE
Indicates a risk of property damage, including damage to the
machine or its individual components.
2.2 Symbols in Text
The following symbol is included to assist you with the use
of the manual:
3.1 Hedge Trimmer and Charger
The hedge trimmer is powered by an integrated lithium ion
battery that cannot be removed from the power tool.
1 Switch Lever
Activates the cutting attachment when depressed in
combination with the trigger switch.
2 Retaining Latch
Locks/unlocks the trigger switch.
3 Trigger Switch Lockout
Must be depressed while the retaining latch is unlocked
to allow activation of the trigger switch.
4 Control Handle
Handle for the operator's rear hand.
Refers to a designated chapter or sub-chapter in this
instruction manual.
3Main Parts
1
2
3
11
13
4
7
109
12
6
8
5
14
15
16
17
#
#
0000-GXX-1427-A1