Instruction Manual

0458-717-9821-B
48
English 22 General Power Tool Safety Warnings
Carrying power tools with your finger on the switch or
energizing power tools that have the switch on invites
accidents.
d)Remove any adjusting key or wrench before turning the
power tool on. A wrench or a key left attached to a rotating
part of the power tool may result in personal injury.
e)Do not overreach. Keep proper footing and balance at all
times. This enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose clothing or jewelery.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewelery or long hair can be caught
in moving parts.
g)If dust extraction and collection devices can be mounted,
they should be connected and used correctly. Use of dust
collection can reduce dust-related hazards.
h)Do not be lulled into a false sense of security and do not
disregard the safety rules even if you are thoroughly
familiar with the electric power tool. Carelessness can
result in serious injuries within fractions of a second.
22.5 Power tool use and care
a)Do not force the power tool. Use the correct power tool for
your application. The correct power tool will do the job
better and safer at the rate for which it was designed.
b)Do not use the power tool if the switch does not turn it on
and off. Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or take a
removable battery pack out of the power tool before
making any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce the
risk of starting the power tool accidentally.
d)Store idle power tools out of the reach of children and do
not allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e)Maintain power tools and accessories with care. Check for
misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the power
tool's operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f) Keep cutting attachments sharp and clean. Properly
maintained cutting attachments with sharp cutting edges
are less likely to bind and are easier to control.
g)Use the power tool, accessories, tool bits etc. in
accordance with these instructions, taking into account
the working conditions and the work to be performed. Use
of the power tool for operations different from those
intended could result in a hazardous situation.
h)Keep handles and grip surfaces dry, clean and free from
oil and grease. Slippery handles and grip surfaces doe not
allow proper operation and control of the power tool in
unforeseen situations.
22.6 Battery tool use and care
a)Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
b)Use power tools only with specifically designated battery
packs. Use of any other battery packs may create a risk of
injury and fire.
c) When battery pack is not in use, keep it away from other
metal objects, like paper clips, coins, keys, nails, screws
or other small objects that can make a connection from
one terminal to another. Shorting the battery terminals
together may cause burns or a fire.
d)Under abusive conditions, liquid may be ejected from the
battery; avoid contact. If contact accidentally occurs, flush
with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause
irritation or burns.