Operation Manual

0458-708-0121-A
22
English 19 Specifications
19.1 STIHL HSA 25 Shrub Shears
– Approved battery: 5120
– Weight without cutting blades, without battery 0.6 kg
19.2 Shrub Shear Blade, Grass Shear Blade
Shrub shear blade
– Tooth spacing: 19 mm
– Cutting length: 200 mm
– Sharpening angle: 30°
Grass shear blade
– Tooth spacing: 16 mm
– Cutting length: 120 mm
19.3 5120 Battery
– Battery technology: Lithium-ion
– Voltage: 10.8 V
– Capacity: 2.0 Ah
– Energy content: 21.6 Wh
– Permissible temperature range for operation and storage:
0°C up to 40 °C
19.4 Charger Supplied with Shrub Shears
– Rated voltage: see rating label
– Frequency: see rating label
– Rated power: see rating label
– Charging current: see rating label
– Permissible temperature range for operation and storage:
+5°C to +40°C
For charging times see www.stihl.com/charging-times.
19.5 Noise and Vibration Data
HSA 25 with shrub shear blade
– Sound pressure level L
p
measured according to
EN 60745-2-15: 70 dB(A) K-value for noise pressure level
is 2.5 dB(A).
– Sound power level L
w
measured according to EN 60745-
2-15: 80 dB(A) K-value for sound power level is 2.5 dB(A).
– Vibration level a
h
measured according to EN 60745-2-15:
1.2 m/s² K-value for vibration level is 2.0 m/s².
HSA 25 with grass shear blade
– Sound pressure level L
p
measured according to
F
pr
EN 60335-2-94: 73 dB(A) K-value for noise pressure
level is 2.5 dB(A).
– Sound power level L
w
measured according to
F
pr
EN 60335-2-94: 80 dB(A) K-value for sound power
level is 2.5 dB(A).
– Vibration measurement a
hv
to F
pr
EN 60335294 1.4 m/s²
K-value for vibration level is 2.0 m/s².
The vibration values quoted above have been measured
according to a standardized test procedure and may be used
to compare electric power tools. Depending on the type of
usage, the vibrations that actually occur may differ from the
values quoted. The vibration values quoted may be used for
an initial assessment of the user's exposure to vibrations.
The actual exposure to vibrations has to be estimated. This
process may also take into account times during which the
electric power tool is switched off and times during which it
is switched on but running off load.
19.6 REACH
REACH is an EC regulation and stands for the Registration,
Evaluation, Authorisation and Restriction of Chemical
substances.
For information on compliance with the REACH regulation
see www.stihl.com/reach.
19 Specifications