Operation Manual
0458-708-0121-A
21
English
18 Troubleshooting
18.2 Troubleshooting Charger
There is a electrical
malfunction.
► Remove battery and insert it again.
► Switch on the shrub shears.
Shrub shears
runtime is too short.
Battery not fully charged ► Fully charge the battery.
Normal battery life has
been exceeded.
► Replace the battery.
Charge process does
not start when
battery is inserted in
the charger.
1 LED glows red. Battery too hot or too cold. ► Allow battery to cool down / warm up.
1 LED flashes red. There is a malfunction in
the battery or charger.
► Remove battery and insert it again.
► If the 1 LED continues to flash red: Do not use the
charger and contact your STIHL servicing dealer.
Condition LEDs on charger Cause Remedy
Condition LED on Charger Cause Remedy
Battery not being
charged.
LED flashes red. No electrical contact
between charger and
battery.
► Remove the battery.
► Clean contacts on charger.
► Fit the battery.
Malfunction in charger. ► Do not use the charger and contact your STIHL
servicing dealer.










