Operation Manual

0458-708-0121-A
18
English 15 Cleaning
– Charger is in an enclosed space.
– Charger is stored separately, away from the battery.
– Charger is not hanging from the connecting cable.
– Charger is in a temperature range between 5°C and
40°C.
15.1 Cleaning the Shrub Shears
► Switch off the shrub shears and remove the battery.
► Clean the shrub shears with a damp cloth or STIHL resin
solvent.
15.2 Cleaning the Cutting Blades
► Switch off the shrub shears and remove the battery.
► Spray both sides of blades with STIHL resin solvent.
► Fit the battery.
► Switch on the shrub shears for 5 seconds.
The cutting blades run. STIHL resin solvent is distributed
evenly.
15.3 Cleaning the Battery
► Clean the battery with a damp cloth.
15.4 Cleaning the Charger
► Disconnect the plug from the wall outlet.
► Clean the charger with a damp cloth.
► Clean the charger’s electrical contacts with a soft brush.
16.1 Sharpening the Cutting Blades
Shrub shear blade
STIHL recommends you have the cutting blades
resharpened by a STIHL servicing dealer.
► Move the cutting blades so that the cutting edges are
easily accessible.
► Use a STIHL flat crosscut file to sharpen each cutting
edge on the upper blade. The file only sharpens on the
forward stroke. Maintain the prescribed sharpening angle,
@ 19.2.
► Turn shrub shear blades over.
► Sharpen the remaining cutting edges.
► Use a damp cloth to remove the filing dust.
► Spray both sides of blades with STIHL resin solvent.
► Switch on the shrub shears for 5 seconds.
The cutting blades run. STIHL resin solvent is distributed
evenly.
► If you have any queries: Contact your STIHL servicing
dealer.
Grass shear blade
The grass shear blade cannot be resharpened.
15 Cleaning
16 Maintenance
0000-GXX-4027-A0